The rigid axle suspension system is the oldest system used in automotive cars. It is rigidly fixed to the car’s frame so it’s called a rigid axle suspension system. In this article, I will discuss the functions and advantages of a rigid axle suspension system.
[lwptoc]
Rigid Axle Suspension System
This is the oldest and best system used in most of the vehicles. This is also known as a solid axle suspension system. It is specially used in trucks, SUVs, and off-road vehicles. In this system, a single axle connects the wheels on either side of the vehicle. Unlike an independent suspension system, where each wheel can move independently, a rigid axle suspension means that the movement of one wheel is directly linked to the movement of the other wheel on the same axle.
The rigid axle itself is a single, solid beam or tube that spans the width of the vehicle and is connected to both wheels. The axle is typically supported by leaf springs, coil springs, or other types of suspension components. The entire axle assembly moves as a single unit, providing a simpler and often more robust design, especially suitable for heavy-duty applications.
Read More- 5 Major Functions of Suspension System You Should Know.
Function of Rigid Axle Suspension System
Rigid axle suspension systems are known for their durability and load-bearing capacity, they may not provide as smooth a ride or as precise handling as independent suspension systems, especially on uneven or rough surfaces. However, they are often preferred in applications where load-carrying capability, simplicity, and durability are prioritized over ride comfort and handling characteristics.
The primary function is to support the weight of the vehicle. It also needs to support the extra weight of the vehicle. The rigid axle, along with its associated suspension components, helps distribute the weight evenly between the wheels. This is a rigid connection between the two wheels, so there are changes to break down the system.
This system is directly connected and supported on the axle housing, which helps to contribute to the overall stability of the vehicle. A rigid axle suspension system can enhance traction, especially in off-road or challenging terrain. When one wheel encounters an obstacle, the other wheel on the same axle remains in contact with the ground, helping to maintain traction and forward momentum.
In off-road scenarios, a rigid axle suspension system allows for greater wheel articulation. This means that one wheel can move up or down without significantly affecting the other wheel on the same axle. This characteristic is advantageous in navigating uneven terrain. This system offers less maintenance cost and it is budget-friendly.
Working of Rigid Axle Suspension System
This type of suspension system was used universally before the introduction of independent front-wheel suspension systems. It may use either two longitudinal leaf springs, or transverse springs, usually in conjunction with shock absorbers.
In this type of suspension, the front wheel hubs rotate on anti-friction bearing on steering spindles which are attached to the steering knuckles. To permit the wheels to be turned by the steering gear, the steering spindle and steering knuckle assemblies are hinged on the axle ends.
The pin that forms the pivot of this hinge is usually referred to as the kingpin or steering knuckle pin. Where the forked portion is integral with the steering knuckle and fits over the end of the axle, the construction is known as Reverse Elliot. In Elliot-type construction, the ends of the axle are forked to hold the steering knuckle extension between the ends.
Read More- Top 7 Signs of Power Steering Failure You Should Know.
Components of Rigid Axle Suspension System
This system is based on a couple of components-
- Leaf Spring- Leaf spring also known as coil spring, helps to support the weight of the vehicle, and as well as it also helps to keep the steering geometry right.
- Shock Absorbers- The shock absorbers are the main component that helps to absorb the major road shocks. They help control the movement of the suspension and improve ride comfort by preventing excessive bouncing or oscillation.
- U-Bolts- U-bolts are the holding component that securely tights the leaf spring or coil springs to the vehicle frame. These bolts play a crucial role as they hold the whole suspension system.
- Bushings– Bushings are used to reduce the friction between the different components of the suspension system. This bushings are made of rubber. They are often placed at pivot points to allow controlled movement while minimizing vibration and noise.
- Panhard Rod- A Panhard rod is also known as a track bar or track rod. This is used to control the lateral movement of the axle. It helps maintain proper alignment between the chassis and the axle as the suspension moves up and down.
- Bump Stops- Bump stops are rubber or polyurethane components that limit the upward travel of the suspension to prevent damage or excessive compression of the springs during hard impacts.
Advantages of Rigid Axle Suspension System
The advantages of this type of suspension system are-
- This type of system is known for its durability and performance.
- The simple design with fewer moving parts often results in a suspension system that can withstand heavy loads and challenging driving conditions, making it well-suited for off-road and heavy-duty applications.
- Rigid axles are capable of supporting significant loads. This makes them ideal for vehicles designed for hauling or towing heavy loads, such as trucks and utility vehicles.
- The design of a rigid axle suspension system is relatively simple compared to independent suspension systems. This simplicity translates to lower manufacturing costs and ease of maintenance, making it a cost-effective choice for certain types of vehicles.
- In off-road or challenging driving conditions, the rigid connection between the wheels on the same axle can enhance traction.
- The rigid connection between the wheels contributes to overall stability, especially when the vehicle is carrying heavy loads.
Disadvantages of Rigid Axle Suspension System
The disadvantages of this system are-
- The axle movement is limited in this system.
- The verticle movement of the springs is very hard as they have limited clearance between the axle and the engine system.
- The steering geometry is controlled precisely in this system.
- Rigid axle systems can contribute to higher unsprung weight compared to independent suspension systems.
- Rigid axle systems can be less adjustable compared to independent suspension systems. Fine-tuning aspects like camber and caster angles may be more challenging, limiting the ability to optimize handling characteristics for specific driving conditions.
- The stiffness of this system makes the axle shaft damaged during uneven bumpy roads.
Conclusion
In conclusion, Rigid axle suspension systems are known for their durability and load-bearing capacity, they may not provide as smooth a ride or as precise handling as independent suspension systems, especially on uneven or rough surfaces. However, they are often preferred in applications where load-carrying capability, simplicity, and durability are prioritized over ride comfort and handling characteristics.
Frequently Asked Questions(FAQ’S)
How does a rigid axle suspension system differ from an independent suspension system?
Unlike independent suspension, where each wheel can move independently, a rigid axle suspension connects both wheels on the same axle, causing them to move together. This design can impact ride comfort, handling, and wheel articulation.
Are rigid axle suspension systems suitable for off-road driving?
Yes, rigid axle systems are often preferred for off-road applications due to their ability to provide better wheel articulation and stability on uneven terrain.
Can a rigid axle suspension system be adjusted for different driving conditions?
While some adjustments are possible, rigid axle systems may be less adjustable than independent suspension systems. Fine-tuning for specific driving conditions can be more limited.
Do comment here